How do I connect the sprinkler to my hose & tap?
To connect to your tap and hose to the Sprinkler, please follow the below instructions:
3. Attach your AquaStop Connector to the other end of the hose – this stops the water flow when you disconnect your watering accessory.
4. Finally, connect your Pulsating Sprinkler to the AquaStop Connector.
Can you connect a second hose to this sprinkler?
Unfortunately it's not possible, as the resulting water pressure when split between two sprinklers could be too low to work effectively.
What sort of lawn is this sprinkler best suited for?
The Pulsating Sprinkler has been specially designed to water large areas up to 450m². It is easily adjustable and can water a full circle or a part of a circle. It has 1 solid jet stream that can be manipulated into a wide fan spray and gives a max area coverage of approx 450m².
What hose can I use with this sprinkler?
All Hozelock hoses can be used with this sprinkler, including the Superhoze & Tuffhoze. Make sure it is connected using an AquaStop Connector.
Please note: If you are using a Superhoze, the sprinkler could move when the hose retracts, so it is recommended to disconnect the sprinkler from the hose as soon as you turn off the tap.
What do the two settings on the top do?
The Pulsating Sprinkler is highly adjustable, so it can be set to suit your garden. There are 3 settings - the two on the top adjust the spray pattern - from a powerful jet to a fine spray. The red setting rings lower down on the sprinkler adjust the area covered, which can be a circle or part of a circle, anywhere from 65 to 360 degrees.
My sprinkler is leaking. Why?
The Sprinkler could be faulty. Please contact consumer services on +44 (0) 121 313 1122. Please ensure you have your original proof of purchase available.